Introduction

Comet’s CTM-PW series high temperature water controllers are used to heat molds and maintain a constant temperature. This series meets wider production demands using higher heating temperatures 356°F (180°C). High temperature water from the mold is returned to the cooling tank and cooled by indirect cooling. The water is then pressurized by the high pressure pump, sent to the heating tank, and then to the mold maintaining a constant temperature. A PID multi-stage temperature controller maintains a mold temperature accuracy reaching 356°±0.9°F (180°±5°C).

Features

• Maximum heating temperature of 356°F (180°C).
• PID multi-stage temperature controller, with 3.2˝ user-friendly LCD maintains stable, precise mold
  temperatures of ±0.9°F (±0.5°C).
• A high efficiency magnetic pump, without seal, for precise temperature control and efficient heat exchange. The interior of the pump is stainless steel to avoid combustion.
• Multiple safety devices with a display alarm include: reverse phase protection, pump overload protection,
  overheating protection, and low water level protection.
• Equipped with high pressure protection, safety pressure relief, automatic water supply, and air exhaust.
• Indirect cooling controls the temperature more accurately and achieves higher heat exchange
  efficiency with the water’s low viscosity.
• RS485 communication interface achieves centralized monitoring with the host.
• Equipped with a water level probe and high-pressure pump plunger to accurately detect water levels. When the system level is too low, the pump plunger replenishes the system with water to prevent the pipe from burning.
• Built-in weekly timer with °F/°C conversion.

Options

• Magnetic filter to prolong the service life.
• Mold temperature and water mold return temperature display.
• Manual air-blowing function.